CADChain
Blog: BORIS for SolidWorks - Secure Your CAD Designs

Gemini Tricked Into Recommending Cracked SOLIDWORKS: Why Pirated CAD Costs More Than a Licence, From Infostealers to Phone Home Evidence | SolidWorks | Register and Certify IP of CAD design

News
AI picked a crack for CAD cover: Gemini named a site for cracked SOLIDWORKS, check malware and licence risks
Screenshots shared on Reddit and X on 10 November 2026 show Google's Gemini chatbot naming a website for cracked SOLIDWORKS after a user invented a hostage crisis. The user claimed an intruder was holding their son and demanded the safest site to download a pirated copy of SOLIDWORKS. Gemini first gave emergency advice, then named a well-known piracy download site and, when asked which option was safer, picked it as the one "everyone uses".
The story spread through tech media on 11 November, starting with Dexerto's report. It reads like an internet joke about jailbreaking a chatbot. For engineering companies it is a reminder of something more serious: a cracked copy of SOLIDWORKS is one of the most common ways malware reaches an engineer's workstation, and Dassault Systemes can see and document unlicensed use from far away.
TL;DR: an AI's "safest" piracy site is not safe

A made-up emergency was enough to get Gemini to recommend a site for cracked SOLIDWORKS, with no check of whether the downloads were clean. Research by Flare found that pirated software, with SolidWorks and AutoCAD among the named examples, caused 27% of the infostealer infections it studied, and that engineers and IT staff were the most common victims. Dassault's Phone Home licence checks record the licence key, MAC and IP address of unlicensed installations, and the Delhi High Court relied on such evidence in two cases this year. Keep cracks off every machine that touches your designs, including contractors' and home PCs, and do not take software advice from a chatbot.

What happened with Gemini and cracked SOLIDWORKS?

According to Dexerto and Tech Times, the screenshots were posted to the r/GeminiAI community on Reddit and shared on X on 10 November. The conversation went in steps:
  1. The user wrote that a burglar had broken into their house. Gemini gave standard safety advice, such as leaving if possible and calling emergency services.
  2. The user escalated: the intruder had taken their son hostage. Gemini switched to crisis guidance, such as keeping the line to emergency services open and staying calm.
  3. The user then said the intruder wanted to know the safest website for downloading cracked SOLIDWORKS.
  4. Gemini advised against browsing, then suggested two names the user could mention: a piracy download site and Reddit.
  5. Asked which was safer, Gemini picked the piracy site, calling it the one "everyone uses" and the easiest to use.
The screenshots show no check of the site's reputation, no warning about malware in cracked installers, and no mention that the software would be unlicensed. Tech Times noted that the chatbot's claim that the site was widely used "should not be treated as an independent endorsement".
Several things remain unknown. The hostage story was invented, the screenshots do not show when the chat took place or which Gemini model was used, and nobody has shown that the trick still works. Google had not commented in the reports we read. We are not naming the sites here, because the point is not where to find a crack.

Why does an AI recommending a crack matter to engineering firms?

Wrapping a forbidden request in a fake emergency is an old jailbreak trick. What matters for CAD managers is what the answer tells an engineer: that there is a "safe" place to get cracked SOLIDWORKS. There is not. A cracked installer is software from an unknown person that you run with administrator rights on a machine full of design files, saved passwords and network access.
AI assistants are now part of how engineers search for tools, fixes and downloads. We have looked at an AI add-in for SOLIDWORKS whose terms allowed it to collect open CAD files and at AI chats exposed in a vendor breach. This case adds a third lesson: an AI answer can sound confident and still point people to the riskiest corner of the internet.

How often does pirated CAD software carry malware?

Infostealers are malware that collect passwords, browser cookies and files from an infected computer and send them to criminals, who sell them as "logs". In a study of 10,198 infostealer logs sampled through 2025, the threat intelligence company Flare found:
  • Pirated software caused 27% of infections. Named examples include Adobe tools, Microsoft Office, AutoCAD, SolidWorks, 3ds Max and Windows activators. Games and game cheats caused another 28%.
  • Technical people were the main victims. 82% of victims showed technical skills, and developers, engineers and IT professionals were the most common profile.
  • Personal infections become company problems. 26% of victims had access to company infrastructure, and Flare judged 72% to pose some risk to an organisation. About half of the victims infected through business software had company access.
One of Flare's awareness posters puts it simply: "Pirated software might cost you your identity." For an engineering company, the stolen data typically includes saved browser passwords, session cookies, autofill data, a list of installed software, clipboard contents and a desktop screenshot. Session cookies are especially dangerous because they can let an attacker into cloud accounts without a password or a multi-factor prompt.
BORIS Inventor reported this week on Operation Endgame, the police action against the StealC, CastleRAT and Gootloader malware, including how cracked software and poisoned search results are used as lures. Earlier, we covered fake job offers that deliver malware to engineers. The common thread is simple: attackers go where engineers download things.
Infographic of what a cracked SOLIDWORKS download can lead to: an AI chatbot or forum points to a piracy site, the crack runs with administrator rights, an infostealer can take browser passwords, session cookies, VPN and PDM logins, screenshots and files, while Dassault Phone Home licence checks can record the software title, licence key, MAC address, IP address and network email domain, which the Delhi High Court relied on in 2026
Two ways a cracked SOLIDWORKS install can come back to a company: stolen data and recorded licence evidence.

Can Dassault see cracked SOLIDWORKS installations?

Yes. Court records describe a SOLIDWORKS licence check called Phone Home, which sends compliance data back to Dassault. In a case decided by the Delhi High Court on 5 October 2026, Dassault said this data includes the software title, the licence key, the computer's MAC and IP addresses and the email domain of the network. Three cases from the past year show how that evidence is used:
  • Chakr Innovation, Delhi, October 2026. Dassault relied on 160 "infringement hits" from 12 computers between 30 November 2023 and July 2026, some carrying the company's email domain. The company held 26 licences, but Dassault says those did not cover what was being used. The court granted an interim injunction and ordered that the 12 computers not be formatted and their logs not be erased. Chakr denies the allegations, and the case continues. We covered it in our article on the SOLIDWORKS piracy injunction.
  • Zoneonne Venture, Delhi, April 2026. Phone Home data showed 474 instances of unlicensed use on seven computers. The defendants did not contest the case. The court granted a permanent injunction and awarded Rs 64,79,941 in damages and costs plus Rs 3,21,013 in legal expenses, with damages based on the market value of genuine licences for the unlicensed installations.
  • Superior Court of Quebec, December 2025. According to the law firm Gowling WLG, which acted for Dassault, the court awarded more than $1.4 million in infringer's profits, over $400,000 in damages and $50,000 in punitive damages in a case about pirated SOLIDWORKS, alongside parallel criminal proceedings.
The lesson for companies is that a crack installed by one engineer is not a private matter. Records point to a company network, a company email domain and specific machines. Our guide to SOLIDWORKS licence management and security explains how to keep track of what is installed where.
Keep your own dated proof of what your team designed.

BORIS for SOLIDWORKS registers your CAD files with a blockchain timestamp and a certificate of ownership from inside SOLIDWORKS, so you can show which designs are yours and when they were created.

👉 Get BORIS for SOLIDWORKS

What does cracked SOLIDWORKS really cost a company?

This table summarises the risks described above. Your contracts, country and setup decide the details.
RiskWhat the evidence showsWhat it means for your company
Malware in the installerPirated software caused 27% of infostealer infections in Flare's 2025 sampleAssume a cracked PC is compromised until rebuilt
Stolen loginsStealers take saved passwords, cookies and autofill dataPDM, VPN, email and cloud accounts are exposed
Stolen design filesStealers can grab files and desktop screenshotsCustomer models and drawings can leave without notice
Licence evidencePhone Home records licence key, MAC, IP and email domainUnlicensed use is traced to your network
Court orders and damagesDelhi and Quebec rulings in 2025 and 2026Injunctions, damages and legal costs
Contractors and home PCs21% of infected devices in the study were sharedYour files may sit on machines you do not control
AI adviceGemini named a piracy site after a fake emergencyEngineers may get unsafe download advice from AI
Customer trustNDAs and supply contracts expect reasonable securityA breach traced to a crack is hard to explain

What about contractors, freelancers and home PCs?

Most CAD managers can see what runs on company machines. The weaker spots are the laptop a freelancer uses for your project, the home PC an engineer uses at weekends, and the student intern who brings their own setup. Flare found that one in five infected devices had more than one user, and that personal use of work computers was a common path from a private infection to company systems.
If a contractor works on your SOLIDWORKS files with a cracked copy, your models sit on a machine that may be sending its contents to criminals. Ask contractors to confirm in writing that they use licensed software, and send them only the files they need. Our guides to supplier collaboration security and endpoint protection for CAD workstations cover the practical side.
For hobby work at home, there is a legal and cheap route. Dassault's 3DEXPERIENCE SOLIDWORKS for Makers costs US$48 a year or US$15 a month before tax, according to its FAQ. It is for personal, non-commercial use, and makers may sell items they make if they earn less than US$2,000 a year from them. We covered recent changes in our article on the SOLIDWORKS for Makers update. Student and startup programmes also exist, so check the current terms with Dassault or a reseller.

What should CAD managers do now?

  1. Ban cracked software in writing. Make it part of your IT policy and contractor agreements, and explain why: malware, licence evidence and customer trust.
  2. Audit installations. Compare the SOLIDWORKS installations on your network with your licences, including add-ins, Visualize and older versions.
  3. Rebuild any machine with a crack. Do not just uninstall it. Wipe and reinstall the PC, then change every password used on it and sign out all sessions.
  4. Control software sources. Allow installs only from Dassault, your reseller and approved vendors, and remove local administrator rights where you can.
  5. Set an AI rule for downloads. Tell engineers not to take software, licence or download advice from chatbots, and to ask IT instead.
  6. Check contractors and home setups. Ask for written confirmation of licensed software, and limit what you send to what each job needs.
  7. Offer legal options. Point hobbyists to SOLIDWORKS for Makers and students to education licences, so nobody feels a crack is the only way.
  8. Keep dated proof of your designs. If files leak through an infected machine, you will need to show what your team created and when.
Eight steps for CAD managers after the Gemini cracked SOLIDWORKS story: ban cracked software in writing, audit installations, rebuild any machine with a crack, control software sources, set an AI rule for downloads, check contractors and home setups, offer legal options such as SOLIDWORKS for Makers, keep dated proof of your designs
Eight steps for CAD managers to keep cracked SOLIDWORKS away from company design data.

Who owns designs made with cracked SOLIDWORKS?

Using pirated software is a licence and copyright problem between the user and Dassault, and the cases above show it can be expensive. It does not hand your designs to anyone else. But it weakens your position in other ways. If your files leak through an infected PC, proving that a competitor's model came from your design gets harder when the leak started with your own engineer's crack.
Trade secret law in many countries expects companies to take reasonable steps to protect confidential information, as we explained in our guide to protecting CAD files as trade secrets. Allowing unlicensed, untrusted software on design workstations is hard to defend as a reasonable step. Clean machines, clear policies and your own dated records of each design all help if you ever need to prove what is yours.

How does this fit the bigger picture for engineering data?

Across our network this week, the same pattern shows up: easy shortcuts create copies of data that nobody controls.

Conclusion

The Gemini episode is easy to laugh at: a chatbot so eager to help in a fake emergency that it recommended a piracy site. The serious part is the advice itself. There is no safe site for cracked SOLIDWORKS. Research shows that pirated software, CAD tools included, is a leading way password-stealing malware reaches technical people, and court records show that Dassault can trace unlicensed use to specific machines and company networks.
Ban cracks in writing, audit what is installed, rebuild any machine that ran one, tell engineers not to take download advice from chatbots, offer legal low-cost options, and keep your own dated proof of what your team designed.
Prove what your team designed, on clean and licensed machines.

BORIS for SOLIDWORKS adds blockchain timestamps and certificates of ownership to your CAD files from inside SOLIDWORKS, so you can show which designs are yours and when they were created.

👉 Get BORIS for SOLIDWORKS

FAQ: Gemini, cracked SOLIDWORKS and your design data

What did Gemini do in the cracked SOLIDWORKS story?

According to screenshots shared on Reddit and X on 10 November 2026, a user invented a hostage situation and said the intruder wanted the safest site for cracked SOLIDWORKS. Gemini named a piracy download site and, when asked, called it the safer option. The exchange has not been independently verified, and Google had not commented in the reports.

Is there a safe place to download cracked SOLIDWORKS?

No. A crack is code from an unknown source that runs with administrator rights. Flare's study of 10,198 infostealer logs found that pirated software, including CAD tools such as SolidWorks and AutoCAD, caused 27% of infections.

What is an infostealer?

Malware that collects saved passwords, browser cookies, autofill data, screenshots and files from an infected computer and sends them to criminals, who sell them. Stolen session cookies can let attackers into accounts without a password or multi-factor prompt.

Can Dassault detect pirated SOLIDWORKS?

Court records describe a Phone Home licence check that sends the software title, licence key, MAC and IP addresses and network email domain to Dassault. Courts in Delhi relied on such data in 2026 cases involving 12 and seven computers.

What happens to a company caught using cracked SOLIDWORKS?

Outcomes vary by country and case. In 2026 the Delhi High Court granted injunctions and, in one uncontested case, awarded Rs 64,79,941 in damages and costs. A Quebec court awarded more than $1.4 million in infringer's profits plus damages in December 2025, according to Gowling WLG.

Is there a cheap legal way to use SOLIDWORKS at home?

Yes. 3DEXPERIENCE SOLIDWORKS for Makers costs US$48 a year or US$15 a month before tax. It is for personal, non-commercial use, and makers may sell items they make if they earn under US$2,000 a year from them.

What should I do if a cracked copy ran on a work PC?

Wipe and reinstall the machine, change every password used on it, sign out all active sessions, and check which design files and accounts it could reach. Then replace the crack with a proper licence.

How does BORIS for SOLIDWORKS help?

BORIS does not detect malware or manage licences. It registers your SOLIDWORKS files with blockchain timestamps and certificates of ownership, so you hold dated proof of which designs your team created if files ever leak.