Blog: BORIS for SolidWorks - Secure Your CAD Designs

Dassault Systèmes Will Charge for AI by Usage: What Its 2026 Capital Markets Day Means for SOLIDWORKS Blue Tokens, Licences and Design Data | SolidWorks | Register and Certify IP of CAD design

2026-11-17 14:17 News
Dassault Systèmes, the company behind SOLIDWORKS, told investors on 17 November 2026 that it will complement seat-based licences with usage-based models that charge for the work its AI Virtual Companions perform. The plan was presented at the company's 2026 Capital Markets Day in Vélizy-Villacoublay, near Paris, together with a target of more than €8 billion in revenue and double-digit revenue and earnings growth in 2029.
The Capital Markets Day press release does not name SOLIDWORKS prices, products or dates for the new models. But SOLIDWORKS users do not have to imagine what usage-based AI looks like. Since 2026, the AI Virtual Companions inside SOLIDWORKS Design, called AURA and LEO, have been metered with Blue Tokens, which a company buys in packs on top of its seats.
So the investor day is less a surprise than a signal. Dassault sees paying for AI by the amount of work done as a growth engine for the next three years. For CAD managers and owners of engineering firms, that raises practical questions: what will AI cost per year, who in the team can spend it, and what design data has to go to the cloud for the AI to do its work?
TL;DR: AI in SOLIDWORKS is becoming a metered cost

At its Capital Markets Day on 17 November 2026, Dassault Systèmes said it will add usage-based models to seat-based licences, charging for the work done by its AI Virtual Companions. It targets revenue above €8 billion in 2029 and says subscriptions are already half of its recurring revenue. No SOLIDWORKS price changes were announced. Today, SOLIDWORKS AI skills in AURA and LEO use Blue Tokens: packs of 25,000 tokens cost US$1,250 a year, sit in a shared company pool and expire after 12 months. Teams should measure their token use, decide who may spend, check which files AI skills need in the cloud, and keep their own dated records of the designs they create with AI help.

What did Dassault Systèmes announce at its 2026 Capital Markets Day?

The press release, published on the morning of 17 November ahead of a webcast at 1:00 pm Paris time, set out a plan for what the company calls a new growth cycle. The main points:
  • 2029 targets. Total revenue above €8 billion and non-IFRS diluted earnings per share of €1.80, which the company says means double-digit revenue and EPS growth in 2029 at constant currencies.
  • Subscriptions. Subscriptions are now half of the company's recurring revenue. Chief financial officer Rouven Bergmann said subscription annual run rate (ARR) is growing more than twice as fast as total ARR.
  • Cloud and 3DEXPERIENCE. Industrial customers are adopting the 3DEXPERIENCE platform and cloud faster. In the release, the Industrials business line covers the Industrial Innovation brands and SOLIDWORKS.
  • AI. 3D UNIV+RSES, launched a year earlier, delivers AI through what Dassault calls its agentic 3DEXPERIENCE platform. Chief executive Pascal Daloz spoke of AI-native Generation 7 solutions.
  • Pricing. The company will complement seat-based licensing with usage-based models that reflect the work performed and value created by its Virtual Companions.
Daloz framed the AI push around accuracy: "In industry, almost right is wrong." The release also lists the usual risks, including customers delaying or cancelling investments and longer sales cycles. A recording of the webcast is due to be available on demand from 18 November, and the next quarterly results come on 3 February 2027.
This is the event Dassault flagged when it reported its third quarter, which we covered in our report on the Q3 2026 results and the cloud shift. On that call, management said Virtual Companions were enabled on 12 to 14 percent of the installed base and that usage is measured in units of work.

What does usage-based AI pricing mean for SOLIDWORKS users?

In short: your AI bill will depend less on how many engineers you have and more on how much work you ask the AI to do. Seats do not go away. The release says usage-based models complement seat-based licensing, so a SOLIDWORKS Design seat remains the entry ticket, and AI work is paid for on top.
What the release does not say matters just as much. As of 17 November 2026, Dassault had not published which products the new usage-based models will cover, what the units will be, what they will cost, or when they start. Nothing in the release says that existing SOLIDWORKS licence prices change. Until the company publishes details, any claim that SOLIDWORKS seats are going away or getting more expensive is speculation.
The best guide to what usage-based AI looks like in practice is the system SOLIDWORKS already runs. We first described it in our article on LEO going agentic at NVIDIA GTC Berlin, and it has become the template Dassault is now promoting to investors.

How do SOLIDWORKS Blue Tokens work today?

According to the SOLIDWORKS Blue Tokens page, tokens measure and meter AI activity across the Virtual Companions. The key rules:
  • You pay when work is done. Tokens are used only when an AI skill runs and produces a result. Simply chatting with a companion does not use them.
  • Three tiers. Simple skills, such as quick questions and guidance, use few tokens. Moderate skills, such as an assembly performance analysis or turning an imported part into a parametric model, use more. Complex skills, such as full drawing generation or highly detailed part generation, use the most.
  • Packs. A pack of 25,000 Blue Tokens costs US$1,250 a year, excluding local tax. Packs expire 12 months after purchase if unused and renew automatically at the end of each subscription period.
  • A shared pool. Tokens for every SOLIDWORKS Design or 3DSwymer licence go into one pool in the company's 3DEXPERIENCE tenant. Tokens do not need to be assigned to individual users, and administrators see the remaining balance in the Members Control Center.
  • Who has access. SOLIDWORKS Design (single user), SOLIDWORKS Design with Cloud Services, Collaborative Designer for SOLIDWORKS and xDesign tenants. Academia, Makers and Student tenants are excluded from the initial rollout.
Resellers add some detail. GoEngineer's FAQ, current as of 4 September 2026, says each eligible commercial user gets a one-time introductory allocation of 2,100 tokens that does not renew, that AI features inside traditional SOLIDWORKS workflows do not use tokens, and that companion skills were still in early access, so consumption per skill may change. Dassault has not published a per-skill price list.
To use the companions inside SOLIDWORKS Design, the official SOLIDWORKS wiki says you need version 2026 SP3.2 or later and access to your company's 3DEXPERIENCE platform. That platform dependency matters this week in particular: as we explained in our guide to the R2027x upgrade weekend, the public cloud goes fully offline on 21 and 22 November 2026, and cloud AI skills will not be available while it is down.

What is known and what is still open?

Use this table to check your own contract and tenant. Details can differ by licence type, region and reseller.
ItemWhat is known on 17 November 2026What to check in your company
SOLIDWORKS Design seatSeat-based licensing stays; usage-based models complement itRenewal dates, named-user or device-locked licences, Cloud Services
Blue Token packs25,000 tokens for US$1,250 a year, expire after 12 months, renew automaticallyWho approves purchases and automatic renewals
Introductory tokens2,100 one-time tokens per eligible commercial user, according to resellersWhether your free tokens are already used up
Token consumptionThree tiers: simple, moderate, complex; only when a skill delivers a resultWhich skills your team actually uses and how often
Token poolShared across the tenant; balance visible in the Members Control CenterWho can spend tokens and who watches the balance
Cloud dataSome skills work without saving design data to the platform; more skills need data in the cloudWhich models and drawings an AI skill sends to the platform
New usage-based modelsAnnounced as a direction; no products, units, prices or dates publishedWhat your reseller says before your next renewal
Excluded tenantsAcademia, Makers and Student tenants are outside the initial token rolloutWhether staff use personal or Makers accounts for work

Why does the pricing model matter for your design data?

Usage-based pricing links cost to the amount of work AI does on your models. That is fair in principle: a team that rarely uses AI pays little for it. But it also means the most valuable, and most expensive, AI work is the work that touches the most design data: generating drawings, converting parts, analysing assemblies.
The SOLIDWORKS wiki says some companion capabilities do not need your design data saved to the 3DEXPERIENCE platform, but that additional skills become available when it is stored in the cloud. So the more you want from the AI, the more of your design data is likely to live on Dassault's platform. That is not necessarily bad, but it should be a decision, not a side effect. Our SOLIDWORKS cloud security guide explains what to check before moving models there.
On training, SOLIDWORKS CEO Manish Kumar said in October that the company's AI models are never trained on customer data, as we reported in our SOLIDWORKS 2027 overview. That is a useful commitment to get in writing in your own contract. Other AI tools have had problems with exactly this kind of promise: our reports on Notion AI chats exposed through an AI provider breach and on the MecAgent add-in terms that allowed collection of open CAD files show why the fine print matters.
Keep your own dated proof of every design, with or without AI.

BORIS for SOLIDWORKS registers your CAD files with a blockchain timestamp and a certificate of ownership from inside SOLIDWORKS, so you can show which version your team created and when, whatever tools helped along the way.

👉 Get BORIS for SOLIDWORKS

How should CAD managers budget for AI tokens?

Treat tokens like any other consumable: measure first, then buy. A few practical habits help:
Run a short pilot. Pick two or three tasks your team does often, such as drawing generation or assembly checks, and record the token balance before and after. Without a published per-skill price list, your own numbers are the only reliable basis for a budget.
Compare tokens with hours. A complex skill that saves an engineer half a day may be cheap. A simple question that a colleague could answer in a minute may not be. Dassault prices tokens on value, so it is fair to measure value too.
Decide who can spend. Because the pool is shared across the tenant, one enthusiastic user can use up a pack meant for the whole team. Agree who uses which skills, and have the platform administrator check the balance regularly.
Watch automatic renewals. Packs renew automatically and expire after 12 months. Put the renewal date in the same calendar as your SOLIDWORKS subscription, and review usage before each one. Our guide to CAD licensing best practices and SOLIDWORKS licence security guide cover the rest of the licence picture.
Check AI output like any other work. Dassault's own CEO line about accuracy applies to your team too. AI-generated drawings and macros still need review and sign-off, as we noted in our article on SOLIDWORKS AI writing macros.

What should SOLIDWORKS teams do now?

  1. Find your token balance. Ask your 3DEXPERIENCE platform administrator to check the remaining Blue Tokens in the Members Control Center.
  2. List the AI skills your team uses. Note which ones are simple, moderate or complex, and how often each runs.
  3. Measure a pilot. Record tokens used per task for a few weeks before buying more packs.
  4. Set spending rules. Decide who may run complex skills and who reviews the shared balance.
  5. Check renewals. Put token pack and seat renewal dates in one place and review usage before each renewal.
  6. Decide what goes to the cloud. Agree which models and drawings may be stored on the 3DEXPERIENCE platform for AI skills, and which stay local.
  7. Get data terms in writing. Ask your reseller for the contract terms on AI processing, retention and training before you scale up.
  8. Keep dated proof of your designs. Record which design versions your team created and when, independent of any AI tool or platform.

What do we still not know?

Several questions had no public answer on 17 November 2026:
  • Which products the new models cover. The release talks about Virtual Companions in general and does not say whether SOLIDWORKS will get new pricing beyond Blue Tokens.
  • Units and prices. No new prices, units or per-skill rates were published.
  • Timing. No start dates were given. The 2029 plan sets the horizon, not a launch date.
  • Desktop versus cloud. It is not stated whether more AI skills will require design data on the 3DEXPERIENCE platform.
The on-demand webcast from 18 November and the fourth-quarter results on 3 February 2027 may answer some of this. We will not guess before then. If you own the designs, the ownership question does not change with the pricing model: see our guide to generative AI and CAD ownership and who owns SOLIDWORKS and what it means for your designs.

How does this fit the bigger picture for engineering data?

Across our network this week, the same theme comes up: AI and cloud platforms are becoming part of the design toolchain, and each one brings its own terms and risks.
  • Platform security. CADChain reports on critical flaws in the 3DEXPERIENCE Station Launcher App, including an unauthenticated remote code execution bug rated 10.0, fixed through a Dassault knowledge base article for customers who run it themselves.
  • AI agents in manufacturing software. BORIS Inventor looks at Anthropic's Claude for Manufacturing, a plugin with manufacturing skills and connectors such as Autodesk Fusion, and what it means for teams whose data sits in Inventor and Vault.
  • Who trains on whose content. Blended BORIS covers the Adobe and Disney AI alliance, where custom Firefly Foundry models are trained on Disney's own world knowledge, while price and model ownership were not disclosed.

Conclusion

Dassault Systèmes used its 2026 Capital Markets Day to tell investors that AI will be paid for by usage, alongside the seats customers already buy. For SOLIDWORKS users, that model is already here in the form of Blue Tokens: a shared pool, priced packs that expire after a year, and skills that cost more the more work they do. No SOLIDWORKS price changes were announced, and the details of the new models are still open.
The sensible response is simple. Measure what your team uses, set rules for who spends, decide deliberately which design data goes to the cloud, get the data terms in writing, and keep your own dated record of the designs you create, whoever or whatever helped create them.
Prove what your team designed, and when.

BORIS for SOLIDWORKS adds blockchain timestamps and certificates of ownership to your CAD files from inside SOLIDWORKS, so you hold dated proof of your designs that does not depend on any AI tool, platform or pricing model.

👉 Get BORIS for SOLIDWORKS

FAQ: Dassault's usage-based AI pricing and SOLIDWORKS

What did Dassault Systèmes announce on 17 November 2026?

At its 2026 Capital Markets Day, the company set targets of more than €8 billion in revenue and €1.80 in non-IFRS diluted earnings per share in 2029, said subscriptions are half of its recurring revenue, and said it will complement seat-based licensing with usage-based models that reflect the work done by its AI Virtual Companions.

Is SOLIDWORKS moving to usage-based pricing?

SOLIDWORKS seats stay. The release says usage-based models complement seat-based licensing. SOLIDWORKS AI skills in AURA and LEO are already metered with Blue Tokens on top of the seat. No new SOLIDWORKS prices or products were announced on 17 November 2026.

How much do SOLIDWORKS Blue Tokens cost?

The official SOLIDWORKS page lists packs of 25,000 Blue Tokens for US$1,250 a year, excluding local tax. Packs expire 12 months after purchase if unused and renew automatically. Resellers say eligible commercial users also get a one-time introductory allocation of 2,100 tokens.

What uses Blue Tokens?

Tokens are used when an AI skill in a Virtual Companion runs and produces a result. Simple guidance uses few tokens, moderate tasks such as assembly performance analysis use more, and complex tasks such as full drawing generation use the most. Chatting with the companion alone does not use tokens.

Can one user spend the whole company's tokens?

Tokens sit in a shared pool in the company's 3DEXPERIENCE tenant and do not need to be assigned to individual users. Administrators can see the balance in the Members Control Center, so teams should agree internal rules on who runs which skills.

Do I have to store my SOLIDWORKS files in the cloud to use AI?

Not for everything. The SOLIDWORKS wiki says some companion capabilities do not need design data saved to the 3DEXPERIENCE platform, but additional skills are available when design data is stored in the cloud. Decide deliberately which files go there.

Is my design data used to train Dassault's AI?

SOLIDWORKS CEO Manish Kumar said in October 2026 that the company's AI models are never trained on customer data. Ask your reseller for the contract terms on AI processing, retention and training so you have the commitment in writing.

How does BORIS for SOLIDWORKS help?

BORIS does not manage AI tokens or licences. It registers your SOLIDWORKS files with blockchain timestamps and certificates of ownership, so you hold dated proof of which designs your team created and when, independent of any AI tool or platform.